| Shop on eBay | C90 - Dynamic Radial Rating (90 million revolutions)4:3490 lbf; R - Cone Backface To Clear Radius1:0.760 mm; Db - Cup Backface Backing Diameter:55.12 mm; C0 - Static Radial Rating:12100 lbf; da - Cone Frontface Backing Diameter:34.04 mm; Bearing Weight:0.30 Kg; Aa - Cage-Cone Backface Clearance:0.8 mm; e - ISO Factor8:0.35; Series:15000; Y - ISO Factor9:1.71; C - Cup Width:15.875 mm; B:20.638 mm; Cg - Geometry Factor:0.0606; |
| GATES 2100-14M-115 POWERGRIP HTD TIMING BELT | b:22 mm; Weight:16.30 Kg; L11:219.00 mm; L:202.00 mm; Appropriate Hydraulic Nut:HMV60; Taper:1:12; Appropriate Withdrawal Nut No.:HM60; Thread D12:Tr300x4; d1:260.00 mm; |
| Gates 425-5M-25 POWERGRIP HTD Timing Belt 425mm L* 25mm W | Adapter Sleeve1:H308; C1 Dynamic Load Rating:104; Cage Type:EJ; Material :Cast Iron; Max Grease Speed:6000; H1:60.0 mm; Max Oil Speed:7500; N1:20.00 mm; Seal Type:Double Lip; G:M12; Bearing:22208K; Jmax:175 mm; Locating Rings (width x OD):SR80X8; Locknut:KM8; UPC Code:999999999; C0 Static Load Rating:99.7; Lockwasher:MB8; H:108.00 mm; H2:25.0 mm; Seal:TSNG508; |
| 560 8MGT 30 GATES POWERGRIP HTD TIMING BELT 8M PITCH, 560MM LONG, 30MM WIDE | Dimension M:11.0 in; Dimension H:12.756 in; Cr - Dynamic Load Rating:255833 lbf; Note:This product line wa; Dimension K:7.5 in; Housing Width:9.5 in; Support Type:Four-Bolt Plummer Bl; Seal Type:High Temperature Pac; Dimension L:29.5 in; Dimension H1:2.0 in; Series Type:Medium Series; Bearing Number:MSE814BR; Pillow/Plummer Block Style:Split Cylindrical Ho; Maximum Speed:850 rpm; Dimension H2:25.6 in; |
| GATES POWERGRIP HTD 8005M15 BELT..NOS | Radius Rs min:0.300 mm; Clearance:C3; Cr - Dynamic Load Rating:4.3 kN; Weight:0.02 Kg; Outside Ring Width B:7.000 mm; Oil Limiting Speed:21000 rpm; Bore Size d:25 mm; Features:Non-Contact Seals; Grease Limiting Speed:18000 rpm; C0r - Static Load Rating:2.9 kN; Outside Diameter D:37.000 mm; |
| Gates PowerGrip HTD Robotics Belts 850-5M-15 | Dimension W:2.0 in; Dimension T:24.3 in; Bearing UPC:013992033932; Dimension H:2.5 in; Dimension S:3.6 in; Series Type:Medium Series; Bearing - Housing - Seal:MSM155BRHRSS; Cr - Dynamic Load Rating:164111 lbf; Note:This product line wa; Maximum Speed:1320 rpm; Dimension N:20.8 in; Tensioning Unit Type:Tension Type; Bearing - Housing - Seal UPC:013992085412; Bearing Type:Split Cylindrical Re; Dimension R:2.2 in; |
| Gates PowerGrip HTD Belt 9505M15 USA Made | Da - Outer Ring Backing Diameter:155.000 mm; UPC Code:087796208742; Superseded Part:22219CJW33; R - Inner Ring To Clear Radius1:2.0 mm; d:95 mm; r - Outer Ring To Clear Radius2:2.0 mm; Y0 - ISO Factor4:2.88; e - ISO Factor3:0.23; C0 - Static Radial Rating:441000 N; Reference Thermal Speed Rating (Grease):3200; Cg - Geometry Factor8:0.067; B - Inner Ring Width:43 mm; Cage Material:Steel; Cage Type:EJ; |
| Gates 7405M09 Powergrip HTD V-Belt - Lot of 11 | D1 - Flange Outer Diameter:3.8558 in; T1 - Bearing Width:1.1875 in; Y - ISO Factor9:1.77; Aa - Cage-Cone Backface Clearance:0.06 in; R - Cone Backface To Clear Radius1:0.09 in; D:3.6718 in; Da - Cup Frontface Backing Diameter:3.56 in; Ab - Cage-Cone Frontface Clearance:0.06 in; Design Units:Imperial; db - Cone Backface Backing Diameter:2.48 in; a - Effective Center Location3:-0.32 in; r - Cup Backface To Clear Radius2:0.130 in; |
| Gates PowerGrip HTD 600-5M BELT | Limiting Speed - Grease:1,400 rpm; Retainer Material:Machined Brass; Bore Type:Cylindrical Bore; Groove Width A:18 mm; Da (max):298 mm; Enclosure:Open; Center Guidance:Fixed Inner Ring Rib; Weight:23.400 kg; Limiting Speed - Oil:1,900 rpm; Static Load Rating:1,560,000 N; Dynamic Load Rating:1,270,000 N; Nr. of Holes:6; da (min):212 mm; Axial Load Factor Y1:2.64; Hole Diameter (do):8 mm; Axial Load Factor Y2:3.93; |
| Gates PowerGrip HTD Robotics Belts 800-5M-15 | Series:355; C - Cup Width:0.8586 in; Cg - Geometry Factor:0.0732; Da - Cup Frontface Backing Diameter:3.27 in; D:3.5433 in; e - ISO Factor2:0.31; Db - Cup Backface Backing Diameter:3.07 in; Y - ISO Factor3:1.96; r - Cup Backface To Clear Radius1:0.090 in; Cup Part Number:352X; Design Units:Imperial; |
| ????️*LOT OF 3* GATES 3755M-15 PowerGrip HTD Timing Belts *WARRANTY+ ???????? SHIPPED* | Bolt Hole Spacing J:117.00 mm; Bearing Unit - Adapter Sleeve:UK206 - H2306; Total Height L:80.00 mm; Dynamic Load Rating:4384 lbf; Dimension A0:1.563 in; Bolt Hole Size N:16 mm; Bolt Size:M14; Flange Thickness A1:13.00 mm; Total Length H:148.00 mm; Locking Style:Adapter Sleeve Locki; Shaft Size d:25 mm; Static Load Rating:2540 lbf; Center of Bearing from Housing End A2:18.00 mm; Housing Style:Two-Bolt Flange; |
| Gates 565-5M-25 PowerGrip HTD Belt 9293-0570 NEW 1 pc | Seal Type:Kevlar Packing Seal; Dimension K:5.5 in; Bearing UPC:013992025449; Weight:654 lb; Housing Width:8.0 in; Bearing - Housing - Seal:LSE1100BRHKPS; Bearing Number:LSE1100BR; Cr - Dynamic Load Rating:190638 lbf; Dimension L:28.5 in; Dimension M:9.0 in; Dimension H:12.244 in; Dimension J:21.0 in; Ca - Axial Load Rating:15017 lbf; Dimension H2:24.4 in; Bearing Type:Split Cylindrical Re; Dimension H1:1.9 in; |
| No. | Brand | J | B | N | D | H | b | d | L |
| 880-8M-50 | - | - | - | - | - | - | - | - | - |
| 4755M15 | - | - | - | - | - | - | - | - | - |
| 4755M15 | - | - | 80 mm | - | 240 mm | - | - | 110 mm | - |
| 459-3M-15 | - | - | - | - | - | - | - | - | - |
| 850-5M-15 | - | - | - | - | - | - | - | - | - |
| 1778-14M | - | - | - | - | 4.8750 in | - | - | 1.8750 in | - |
| 9505M15 | - | - | - | - | 170 mm | - | - | 95 mm | - |
| 800-5M-15 | - | - | - | - | 3.5433 in | - | - | - | - |
| 2100-14M-115 | - | - | - | - | - | - | 22 mm | - | 202.00 mm |
| 560 | - | - | - | - | - | - | - | - | - |
| 14205M25 | - | - | 23.012 mm | - | - | - | - | - | - |
| 340020M170 | - | - | - | - | - | - | - | - | - |
| 1050-5M-25 | - | - | - | - | - | - | - | - | - |
| 8005M15 | - | - | - | - | - | - | - | - | - |
| 9293-2201 | - | - | - | - | - | - | - | - | - |
| 1512 | - | - | - | - | - | - | - | - | - |
| 655-5M-15 | - | 420 mm | - | - | - | - | - | - | 500 mm |
| 600-5M-15 | - | - | - | - | 17.6250 in | - | - | 12.5000 in | - |
| 3* | - | - | - | - | - | - | - | - | - |
| 1610-14M-115 | - | - | - | - | - | - | - | - | - |
| 7208M20 | - | 320.00 mm | - | 26 mm | - | 218 mm | - | - | 380.00 mm |
Gates PowerGrip HTD Belt 5mm 645-5M-15 Video
PowerGrip HTD Belts - Gates
PowerGrip® HTD® belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. ; Fiberglass tensile cord provides high ...
GATES POWERGRIP® HTD® 3M & 5M - Industrial Belt Drives
The HTD® curvilinear tooth form ensures an optimised load distribution leading to high power transmission in low speed and high torque applications.
Industrial PowerGrip HTD Belt .591 in. GIB 6155M15
Buy Belt - Industrial PowerGrip HTD Belt .591 in. - GIB 6155M15 online from NAPA Auto Parts Stores. Get deals on automotive parts, truck parts and more.
PowerGrip® HTD® Timing Belts | Gates Corporation
PowerGrip® HTD® 8M, 14M and 20M belts are used in high performance drives in the machine tool, paper and textile industries where durability and low maintenance ...
Gates 776-8M-50 PowerGrip 8mm Pitch HTD Belt 9293- ...
PowerGrip HTD belts are suitable for many applications including data storage, hand power tools, postage handling, food processors, office machines, centrifuges ...
Gates PowerGrip HTD Belts 390-3M-15
Gates PowerGrip HTD Belts 390-3M-15: Amazon.com: Industrial & Scientific.
PowerGrip® HTD® | Gates Unitta
PowerGrip® HTD® and Timing belts have historically been the most commonly used rubber synchronous belt profiles in the industry. Gates originated the HTD ...