| BTG customized Gates PowerGrip HTD 7208M20 (720-8M-20) for temporary drive belt | Max Oil Speed:3800; Seal Type:Taconite; N1:32.00 mm; L:380.00 mm; Shaft Diameter db:115 mm; A3:235 mm; N:26 mm; Bearing:22220; H:218 mm; Housing:SNT 520-617; Jmin:314 mm; Material :Cast Iron; C0 Static Load Rating:502; C1 Dynamic Load Rating:435; J:320.00 mm; Jmax:326 mm; H2:40 mm; Max Grease Speed:3100; Seal:TA220; Housing Mass:17.6 Kg; |
| Gates PowerGrip HTD Belt 4755M15 USA Made | Shaft Tolerance:0.0030 in; Y2 - Geometry Factor:4.31; Shaft Size :85 mm; Full Timken Part Number:QAFL18A085SB; Dimension H:1.28 in; Eng Internal Radial Clearance - Min:0.0024; Dimension F:8.38 in; Oil Lubrication - B/C/O Seal:1000 rpm; Dimension RA:0.16 in; e - Geometry Factor:0.23; Dimension E:6.72 in; Float:0.083 in; Engineering Group:Mounted Bearing; Grease Lubrication - M/N Seal:1400 rpm; |
| Gates PowerGrip HTD Belt 9505M15 USA Made | Da - Outer Ring Backing Diameter:155.000 mm; UPC Code:087796208742; Superseded Part:22219CJW33; R - Inner Ring To Clear Radius1:2.0 mm; d:95 mm; r - Outer Ring To Clear Radius2:2.0 mm; Y0 - ISO Factor4:2.88; e - ISO Factor3:0.23; C0 - Static Radial Rating:441000 N; Reference Thermal Speed Rating (Grease):3200; Cg - Geometry Factor8:0.067; B - Inner Ring Width:43 mm; Cage Material:Steel; Cage Type:EJ; |
| Gates PowerGrip HTD Synchronous Timing Belt 9293-2201 102-3M-09 | Shaft Size:105 mm; Dimension H:7.520 in; Housing Width:7.9 in; Dimension H2:15.9 in; Dimension J:17.2 in; Note:This product line wa; Dimension H1:1.5 in; Dimension K:3.2 in; Shipping Weight:431 lb; Cor - Static Load Rating:176025 lbf; Bolt Size:4 x M24; Seal Type:High Temperature Pac; Maximum Speed:1820 rpm; Dimension M:6.0 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Bearing Number:HSM105BX; |
| Gates Powergrip HTD 3M Synchronous Timing Belts, pn HTD3M95 | D:62 mm; da:36 mm; d:30 mm; Static Load Rating:18,700 N; Da:56 mm; Configuration:Double Row; B:23.8 mm; ra:1 mm; Bore Type:Cylindrical Bore; Limiting Speed - Oil:8,000 rpm; Fillet Radius/Chamfer:1 mm; Dynamic Load Rating:25,900 N; Weight:0.290 kg; Enclosure:Double Seal; Radial Clearance:0.013 to 0.028 mm; |
| Gates PowerGrip HTD Robotics Belts 600-5M-15 | Cg - Geometry Factor11:0.186; d:12.5000 in; Cone Part Number:HM259049DH; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:56000 lbf; Ab - Cage-Cone Frontface Clearance:0.21 in; Aa - Cage-Cone Backface Clearance:0 in; Design Units:Imperial; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:97800 lbf; K - Factor7:1.74; da - Cone Frontface Backing Diameter:13.39 in; T - Bearing Width across Cups:6.2499 in; |
| D&D 1050-5M-25 PowerGrip HTD Belts Lot Of 10 | Grease Lubrication - T Seal:2000 rpm; Oil Lubrication - M/N Seal:1400 rpm; Eng Internal Radial Clearance - Max:0.0039; Y2 - Geometry Factor:4.31; Dimension R:0.25 in; Shaft Size Type:Imperial; Dimension H:1.13 in; Grease Lubrication - B/C/O Seal:1000 rpm; Bearing Number:22218; Locking Style:Eccentric; Engineering Group:Mounted Bearing; C0 - Static Load:87200 lb; Dimension D:7.63 in; C - Dynamic Load (Basic):79700 lb; |
| Gates Unitta 459-3M-15 POWERGRIP HTD Timing Belt 459mm L* 15mm W | Snap Ring Width f max:3.500 mm; Grease Reference Speed:4200 rpm; Outside Ring Width B:49.000 mm; Weight:8.110 Kg; Bore Size d:105 mm; Clearance:C3; Snap Ring Diameter D2 max:237.000 mm; Cr - Dynamic Load Rating:183.7 kN; Oil Reference Speed:6000 rpm; Radius Rs min:3.000 mm; C0r - Static Load Rating:153.1 kN; Features:Snap Ring; Outside Diameter D:225.000 mm; |
| Gates PowerGrip HTD 600-5M BELT | Limiting Speed - Grease:1,400 rpm; Retainer Material:Machined Brass; Bore Type:Cylindrical Bore; Groove Width A:18 mm; Da (max):298 mm; Enclosure:Open; Center Guidance:Fixed Inner Ring Rib; Weight:23.400 kg; Limiting Speed - Oil:1,900 rpm; Static Load Rating:1,560,000 N; Dynamic Load Rating:1,270,000 N; Nr. of Holes:6; da (min):212 mm; Axial Load Factor Y1:2.64; Hole Diameter (do):8 mm; Axial Load Factor Y2:3.93; |
| GATES 2100-14M-115 POWERGRIP HTD TIMING BELT | b:22 mm; Weight:16.30 Kg; L11:219.00 mm; L:202.00 mm; Appropriate Hydraulic Nut:HMV60; Taper:1:12; Appropriate Withdrawal Nut No.:HM60; Thread D12:Tr300x4; d1:260.00 mm; |
| Shop on eBay | C90 - Dynamic Radial Rating (90 million revolutions)4:3490 lbf; R - Cone Backface To Clear Radius1:0.760 mm; Db - Cup Backface Backing Diameter:55.12 mm; C0 - Static Radial Rating:12100 lbf; da - Cone Frontface Backing Diameter:34.04 mm; Bearing Weight:0.30 Kg; Aa - Cage-Cone Backface Clearance:0.8 mm; e - ISO Factor8:0.35; Series:15000; Y - ISO Factor9:1.71; C - Cup Width:15.875 mm; B:20.638 mm; Cg - Geometry Factor:0.0606; |
| Gates PowerGrip HTD 475-5M Timing Belt, 15 mm wide, NEW | Cage Type:Stamped Steel; Db - Cup Backface Backing Diameter:455.93 mm; Y - ISO Factor9:1.21; G1 - Heat Generation Factor (Roller-Raceway):2260; C1 - Dynamic Radial Rating (1 million revolutions)5:133000 lbf; Design Units:Imperial; G2 - Heat Generation Factor (Rib-Roller End):529; Cg - Geometry Factor:0.19; a - Effective Center Location3:42.9 mm; db - Cone Backface Backing Diameter:406.91 mm; C0 - Static Radial Rating:311000 lbf; |
| No. | Brand | J | B | N | D | H | b | d | L |
| 8005M15 | - | - | - | - | - | - | - | - | - |
| 800-5M-15 | - | - | - | - | 3.5433 in | - | - | - | - |
| 9293-2201 | - | - | - | - | - | - | - | - | - |
| 1050-5M-25 | - | - | - | - | - | - | - | - | - |
| 14205M25 | - | - | 23.012 mm | - | - | - | - | - | - |
| 475-5M | - | - | 49.213 mm | - | 479.425 mm | - | - | - | - |
| 4755M15 | - | - | - | - | - | - | - | - | - |
| 400mm | - | - | - | - | - | - | - | - | - |
| 460020M170 | - | - | - | - | - | - | - | - | - |
| 340020M170 | - | - | - | - | - | - | - | - | - |
| 3M | - | - | 23.8 mm | - | 62 mm | - | - | 30 mm | - |
| 1778-14M | - | - | - | - | 4.8750 in | - | - | 1.8750 in | - |
| 3* | - | - | - | - | - | - | - | - | - |
| 6005M15 | - | - | 19.449 mm | - | 59.530 mm | - | - | - | - |
| 1512 | - | - | - | - | - | - | - | - | - |
| 4755M15 | - | - | 80 mm | - | 240 mm | - | - | 110 mm | - |
| 600-5M | - | - | - | - | 310 mm | - | - | 200 mm | - |
| 425-5M-25 | - | - | - | - | - | 108.00 mm | - | - | - |
| 600-5M-15 | - | - | - | - | 17.6250 in | - | - | 12.5000 in | - |
| 880-8M-50 | - | - | - | - | - | - | - | - | - |
| 800-5M-25 | - | - | - | - | - | - | - | - | - |
Gates 880-8M-50 Power Grip HTD Belt Video
Industrial PowerGrip HTD Belt .591 in. GIB 6155M15
Buy Belt - Industrial PowerGrip HTD Belt .591 in. - GIB 6155M15 online from NAPA Auto Parts Stores. Get deals on automotive parts, truck parts and more.
GATES POWERGRIP® HTD® 3M & 5M - Industrial Belt Drives
The HTD® curvilinear tooth form ensures an optimised load distribution leading to high power transmission in low speed and high torque applications.
Gates 776-8M-50 PowerGrip 8mm Pitch HTD Belt 9293- ...
PowerGrip HTD belts are suitable for many applications including data storage, hand power tools, postage handling, food processors, office machines, centrifuges ...
PowerGrip® HTD® | Gates Unitta
PowerGrip® HTD® and Timing belts have historically been the most commonly used rubber synchronous belt profiles in the industry. Gates originated the HTD ...
PowerGrip® HTD® Timing Belts | Gates Corporation
PowerGrip® HTD® 8M, 14M and 20M belts are used in high performance drives in the machine tool, paper and textile industries where durability and low maintenance ...
Gates PowerGrip HTD Belts 390-3M-15
Gates PowerGrip HTD Belts 390-3M-15: Amazon.com: Industrial & Scientific.
PowerGrip HTD Belts - Gates
PowerGrip® HTD® belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. ; Fiberglass tensile cord provides high ...