| Gates Unitta 459-3M-15 POWERGRIP HTD Timing Belt 459mm L* 15mm W | Snap Ring Width f max:3.500 mm; Grease Reference Speed:4200 rpm; Outside Ring Width B:49.000 mm; Weight:8.110 Kg; Bore Size d:105 mm; Clearance:C3; Snap Ring Diameter D2 max:237.000 mm; Cr - Dynamic Load Rating:183.7 kN; Oil Reference Speed:6000 rpm; Radius Rs min:3.000 mm; C0r - Static Load Rating:153.1 kN; Features:Snap Ring; Outside Diameter D:225.000 mm; |
| Gates Powergrip HTD 3M Synchronous Timing Belts, pn HTD3M95 | D:62 mm; da:36 mm; d:30 mm; Static Load Rating:18,700 N; Da:56 mm; Configuration:Double Row; B:23.8 mm; ra:1 mm; Bore Type:Cylindrical Bore; Limiting Speed - Oil:8,000 rpm; Fillet Radius/Chamfer:1 mm; Dynamic Load Rating:25,900 N; Weight:0.290 kg; Enclosure:Double Seal; Radial Clearance:0.013 to 0.028 mm; |
| Gates PowerGrip HTD Belt 4755M15 USA Made | Shaft Tolerance:0.0030 in; Y2 - Geometry Factor:4.31; Shaft Size :85 mm; Full Timken Part Number:QAFL18A085SB; Dimension H:1.28 in; Eng Internal Radial Clearance - Min:0.0024; Dimension F:8.38 in; Oil Lubrication - B/C/O Seal:1000 rpm; Dimension RA:0.16 in; e - Geometry Factor:0.23; Dimension E:6.72 in; Float:0.083 in; Engineering Group:Mounted Bearing; Grease Lubrication - M/N Seal:1400 rpm; |
| Gates 880-8M-50 Power Grip HTD Belt | Pre Install Clearance Min:0.0024 in; Grease Lubrication - T Seal:2000 rpm; Float:0.083 in; Dimension L Exp:4.40 in; Y2 - Geometry Factor:4.31; Shaft Tolerance:0.0030 in; Y1 - Geometry Factor:2.90; Pre Install Clearance Max:0.0039 in; Dimension A:0.59 in; Bearing Number:22218; UPC Code:0883450078221; C - Dynamic Load (Basic):79700 lb; Eng Internal Radial Clearance - Max:0.0039; e - Geometry Factor:0.23; |
| Gates PowerGrip HTD Poly Chain Synchronous Belt 1778-14M | Aa - Cage-Cone Backface Clearance:0.21 in; T - Bearing Width across Cones:3.0624 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:15500 lbf; Cg - Geometry Factor12:0.0772; Design Units:Imperial; Cone Part Number:72187; Y2 - ISO Factor10:1.36; K - Factor7:0.79; Cage Type:Stamped Steel; Da - Cup Frontface Backing Diameter:4.56 in; e - ISO Factor8:0.74; Series:72000; G2 - Heat Generation Factor (Rib-Roller End):14.1; |
| Gates PowerGrip HTD Belt 5205M15 USA Made | Groove Diameter:127.6 mm; Limiting Speed - Grease:4,800 rpm; Dynamic Load Rating:19,900 N; D:130 mm; Configuration:Single Row; B:13 mm; Limiting Speed - Oil:5,600 rpm; Factor fo:15.9; Static Load Rating:21,900 N; Bore Type:Cylindrical Bore; ra (max):1 mm; Weight:0.335 kg; Cy (max):2.9 mm; Enclosure:Open; Radial Clearance:0.036 to 0.066 mm; Groove Width:1.3 mm; r1:0.5 mm; Fillet Radius/Chamfer:1 mm; |
| Gates 1610-14M-115 PowerGrip HTD Transmission Belt 1610 mm L 115 mm W 115 Teeth | Support Type:Four-Bolt Plummer Bl; Bolt Size:4 x 1/2; Dimension H2:7.2 in; Bearing UPC:013992025883; Dimension L :11-1/8 in; Cor - Static Load Rating:25848 lbf; Seal Type:Aluminium Triple Lab; Dimension J2 :8-5/8 in; Note:This product line wa; Shaft Size:2-7/16 in; Series Type:Light Series; Dimension J1 :9-5/8 in; Housing Width:4.1 in; Bearing Number:LSE207BR; Maximum Speed:3940 rpm; |
| Gates PowerGrip HTD Robotics Belts 850-5M-15 | Dimension W:2.0 in; Dimension T:24.3 in; Bearing UPC:013992033932; Dimension H:2.5 in; Dimension S:3.6 in; Series Type:Medium Series; Bearing - Housing - Seal:MSM155BRHRSS; Cr - Dynamic Load Rating:164111 lbf; Note:This product line wa; Maximum Speed:1320 rpm; Dimension N:20.8 in; Tensioning Unit Type:Tension Type; Bearing - Housing - Seal UPC:013992085412; Bearing Type:Split Cylindrical Re; Dimension R:2.2 in; |
| Gates PowerGrip HTD Robotics Belts 655-5M-15 | Seal Type:Labyrinth; J:420 mm; Jmax:427 mm; Housing:SNT 528; Material :Cast Iron; Locating Rings (width x OD):SR250X5; Housing Mass:39 Kg; Cage Type:EJ; Shaft Diameter d:125 mm; Max Grease Speed:1500; Bearing:23228K; Seal:LO528; L:500 mm; Lockwasher:MB28; Bolt Qty:2; End Cover2:EC528; G:M30; Adapter Sleeve1:H2328; A1:150 mm; H2:50.0 mm; |
| Gates PowerGrip HTD Robotics Belts 800-5M-15 | Series:355; C - Cup Width:0.8586 in; Cg - Geometry Factor:0.0732; Da - Cup Frontface Backing Diameter:3.27 in; D:3.5433 in; e - ISO Factor2:0.31; Db - Cup Backface Backing Diameter:3.07 in; Y - ISO Factor3:1.96; r - Cup Backface To Clear Radius1:0.090 in; Cup Part Number:352X; Design Units:Imperial; |
| BTG customized Gates PowerGrip HTD 7208M20 (720-8M-20) for temporary drive belt | Max Oil Speed:3800; Seal Type:Taconite; N1:32.00 mm; L:380.00 mm; Shaft Diameter db:115 mm; A3:235 mm; N:26 mm; Bearing:22220; H:218 mm; Housing:SNT 520-617; Jmin:314 mm; Material :Cast Iron; C0 Static Load Rating:502; C1 Dynamic Load Rating:435; J:320.00 mm; Jmax:326 mm; H2:40 mm; Max Grease Speed:3100; Seal:TA220; Housing Mass:17.6 Kg; |
| Gates PowerGrip HTD Belt 9505M15 USA Made | Da - Outer Ring Backing Diameter:155.000 mm; UPC Code:087796208742; Superseded Part:22219CJW33; R - Inner Ring To Clear Radius1:2.0 mm; d:95 mm; r - Outer Ring To Clear Radius2:2.0 mm; Y0 - ISO Factor4:2.88; e - ISO Factor3:0.23; C0 - Static Radial Rating:441000 N; Reference Thermal Speed Rating (Grease):3200; Cg - Geometry Factor8:0.067; B - Inner Ring Width:43 mm; Cage Material:Steel; Cage Type:EJ; |
| No. | Brand | J | B | N | D | H | b | d | L |
| 560 | - | - | - | - | - | - | - | - | - |
| 600-5M-15 | - | - | - | - | 17.6250 in | - | - | 12.5000 in | - |
| 9505M15 | - | - | - | - | 170 mm | - | - | 95 mm | - |
| 3M | - | - | 23.8 mm | - | 62 mm | - | - | 30 mm | - |
| 425-5M-25 | - | - | - | - | - | 108.00 mm | - | - | - |
| 655-5M-15 | - | 420 mm | - | - | - | - | - | - | 500 mm |
| 711-3M-15 | - | - | 19.000 mm | - | 63.000 mm | - | - | 38.000 mm | - |
| 880-8M-50 | - | - | - | - | - | - | - | - | - |
| 2100-14M-115 | - | - | - | - | - | - | 22 mm | - | 202.00 mm |
| 8005M15 | - | - | - | - | - | - | - | - | - |
| 3* | - | - | - | - | - | - | - | - | - |
| 5205M15 | - | - | 13 mm | - | 130 mm | - | - | 105 mm | - |
| 1778-14M | - | - | - | - | 4.8750 in | - | - | 1.8750 in | - |
| 7208M20 | - | 320.00 mm | - | 26 mm | - | 218 mm | - | - | 380.00 mm |
| 400mm | - | - | - | - | - | - | - | - | - |
| 4600-20M-290 | - | - | - | - | - | - | - | - | - |
| 6005M15 | - | - | 19.449 mm | - | 59.530 mm | - | - | - | - |
| 9293-2201 | - | - | - | - | - | - | - | - | - |
| 1610-14M-115 | - | - | - | - | - | - | - | - | - |
| 7405M09 | - | - | - | - | 3.6718 in | - | - | - | - |
| 1512 | - | - | - | - | - | - | - | - | - |
| 340020M170 | - | - | - | - | - | - | - | - | - |
| 1050-5M-25 | - | - | - | - | - | - | - | - | - |
| 800-5M-25 | - | - | - | - | - | - | - | - | - |
Gates PowerGrip HTD Timing Synchro Belt 14205M25 USA Made Video
PowerGrip HTD Belts - Gates
PowerGrip® HTD® belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. ; Fiberglass tensile cord provides high ...
PowerGrip® HTD® Timing Belts | Gates Corporation
PowerGrip® HTD® 8M, 14M and 20M belts are used in high performance drives in the machine tool, paper and textile industries where durability and low maintenance ...
PowerGrip® HTD® | Gates Unitta
PowerGrip® HTD® and Timing belts have historically been the most commonly used rubber synchronous belt profiles in the industry. Gates originated the HTD ...
Gates PowerGrip HTD Belts 390-3M-15
Gates PowerGrip HTD Belts 390-3M-15: Amazon.com: Industrial & Scientific.
GATES POWERGRIP® HTD® 3M & 5M - Industrial Belt Drives
The HTD® curvilinear tooth form ensures an optimised load distribution leading to high power transmission in low speed and high torque applications.
Industrial PowerGrip HTD Belt .591 in. GIB 6155M15
Buy Belt - Industrial PowerGrip HTD Belt .591 in. - GIB 6155M15 online from NAPA Auto Parts Stores. Get deals on automotive parts, truck parts and more.
Gates 776-8M-50 PowerGrip 8mm Pitch HTD Belt 9293- ...
PowerGrip HTD belts are suitable for many applications including data storage, hand power tools, postage handling, food processors, office machines, centrifuges ...