| Gates Unitta 459-3M-15 POWERGRIP HTD Timing Belt 459mm L* 15mm W | Snap Ring Width f max:3.500 mm; Grease Reference Speed:4200 rpm; Outside Ring Width B:49.000 mm; Weight:8.110 Kg; Bore Size d:105 mm; Clearance:C3; Snap Ring Diameter D2 max:237.000 mm; Cr - Dynamic Load Rating:183.7 kN; Oil Reference Speed:6000 rpm; Radius Rs min:3.000 mm; C0r - Static Load Rating:153.1 kN; Features:Snap Ring; Outside Diameter D:225.000 mm; |
| Gates PowerGrip HTD 600-5M BELT | Limiting Speed - Grease:1,400 rpm; Retainer Material:Machined Brass; Bore Type:Cylindrical Bore; Groove Width A:18 mm; Da (max):298 mm; Enclosure:Open; Center Guidance:Fixed Inner Ring Rib; Weight:23.400 kg; Limiting Speed - Oil:1,900 rpm; Static Load Rating:1,560,000 N; Dynamic Load Rating:1,270,000 N; Nr. of Holes:6; da (min):212 mm; Axial Load Factor Y1:2.64; Hole Diameter (do):8 mm; Axial Load Factor Y2:3.93; |
| ????️*LOT OF 3* GATES 3755M-15 PowerGrip HTD Timing Belts *WARRANTY+ ???????? SHIPPED* | Bolt Hole Spacing J:117.00 mm; Bearing Unit - Adapter Sleeve:UK206 - H2306; Total Height L:80.00 mm; Dynamic Load Rating:4384 lbf; Dimension A0:1.563 in; Bolt Hole Size N:16 mm; Bolt Size:M14; Flange Thickness A1:13.00 mm; Total Length H:148.00 mm; Locking Style:Adapter Sleeve Locki; Shaft Size d:25 mm; Static Load Rating:2540 lbf; Center of Bearing from Housing End A2:18.00 mm; Housing Style:Two-Bolt Flange; |
| Gates Powergrip HTD 3M Synchronous Timing Belts, pn HTD3M95 | D:62 mm; da:36 mm; d:30 mm; Static Load Rating:18,700 N; Da:56 mm; Configuration:Double Row; B:23.8 mm; ra:1 mm; Bore Type:Cylindrical Bore; Limiting Speed - Oil:8,000 rpm; Fillet Radius/Chamfer:1 mm; Dynamic Load Rating:25,900 N; Weight:0.290 kg; Enclosure:Double Seal; Radial Clearance:0.013 to 0.028 mm; |
| Gates 7405M09 Powergrip HTD V-Belt - Lot of 11 | D1 - Flange Outer Diameter:3.8558 in; T1 - Bearing Width:1.1875 in; Y - ISO Factor9:1.77; Aa - Cage-Cone Backface Clearance:0.06 in; R - Cone Backface To Clear Radius1:0.09 in; D:3.6718 in; Da - Cup Frontface Backing Diameter:3.56 in; Ab - Cage-Cone Frontface Clearance:0.06 in; Design Units:Imperial; db - Cone Backface Backing Diameter:2.48 in; a - Effective Center Location3:-0.32 in; r - Cup Backface To Clear Radius2:0.130 in; |
| 560 8MGT 30 GATES POWERGRIP HTD TIMING BELT 8M PITCH, 560MM LONG, 30MM WIDE | Dimension M:11.0 in; Dimension H:12.756 in; Cr - Dynamic Load Rating:255833 lbf; Note:This product line wa; Dimension K:7.5 in; Housing Width:9.5 in; Support Type:Four-Bolt Plummer Bl; Seal Type:High Temperature Pac; Dimension L:29.5 in; Dimension H1:2.0 in; Series Type:Medium Series; Bearing Number:MSE814BR; Pillow/Plummer Block Style:Split Cylindrical Ho; Maximum Speed:850 rpm; Dimension H2:25.6 in; |
| 1512 8MGT 30 GATES POWERGRIP HTD TIMING BELT 8M PITCH, 1512MM LONG, 30MM WIDE | Pre Install Clearance Min:0.0030 in; Dimension C:3.7 in; Dimension D Min:7.88 in; Dimension F:10.88 in; Oil Lubrication - T Seal:2900 rpm; Dimension J (Bolt Size):0.625 in; Weight:27 lb; UPC Code:0883450079679; Oil Lubrication - M/N Seal:1600 rpm; Y2 - Geometry Factor:4.67; Grease Lubrication - T Seal:2400 rpm; Locking Style:Double V-Lock; Dimension G:2.700 in; C - Dynamic Load (Basic):49900 lb; Float:0.083 in; |
| Gates 425-5M-25 POWERGRIP HTD Timing Belt 425mm L* 25mm W | Adapter Sleeve1:H308; C1 Dynamic Load Rating:104; Cage Type:EJ; Material :Cast Iron; Max Grease Speed:6000; H1:60.0 mm; Max Oil Speed:7500; N1:20.00 mm; Seal Type:Double Lip; G:M12; Bearing:22208K; Jmax:175 mm; Locating Rings (width x OD):SR80X8; Locknut:KM8; UPC Code:999999999; C0 Static Load Rating:99.7; Lockwasher:MB8; H:108.00 mm; H2:25.0 mm; Seal:TSNG508; |
| Gates PowerGrip HTD Robotics Belts 800-5M-15 | Series:355; C - Cup Width:0.8586 in; Cg - Geometry Factor:0.0732; Da - Cup Frontface Backing Diameter:3.27 in; D:3.5433 in; e - ISO Factor2:0.31; Db - Cup Backface Backing Diameter:3.07 in; Y - ISO Factor3:1.96; r - Cup Backface To Clear Radius1:0.090 in; Cup Part Number:352X; Design Units:Imperial; |
| Gates PowerGrip HTD 711-3M-15 Timing Belt - USED | B - Cone Width:17.000 mm; a - Effective Center Location3:-2.3 mm; Cone Part Number:JL69349P; G2 - Heat Generation Factor (Rib-Roller End):13.6; C90 - Dynamic Radial Rating (90 million revolutions)4:13200 N; Bearing Weight:0.20 Kg; db - Cone Backface Backing Diameter:49.53 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:51000 N; C0 - Static Radial Rating:55000 N; B:19.000 mm; d:38.000 mm; Db - Cup Backface Backing Diameter:55.88 mm; |
| Gates PowerGrip HTD Timing Synchro Belt 14205M25 USA Made | Da - Cup Frontface Backing Diameter:71.10 mm; G2 - Heat Generation Factor (Rib-Roller End):13.3; B:23.012 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; C - Cup Width:18.186 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2980 lbf; B - Cone Width:19.812 mm; Y - ISO Factor9:1.5; R - Cone Backface To Clear Radius1:3.560 mm; C0 - Static Radial Rating:16700 lbf; r - Cup Backface To Clear Radius2:2.29 mm; |
| D&D Power Drive 4600-20M-290 PowerGrip HTD Belt, No Box* | Bearing Number:LSM280BR; Bolt Size:4 x M36; Note:This product line wa; Bearing Type:Split Cylindrical Re; Series Type:Light Series; Shaft Size:280 mm; Dimension H:300 mm; Support Type:Four-Bolt Plummer Bl; Dimension L:830 mm; Housing Width:8.0 in; Bearing UPC:013992029454; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension M:310 mm; Ca - Axial Load Rating:15017 lbf; Seal Type:High Temperature Pac; |
| No. | Brand | J | B | N | D | H | b | d | L |
| 4755M15 | - | - | 80 mm | - | 240 mm | - | - | 110 mm | - |
| 400mm | - | - | - | - | - | - | - | - | - |
| 3* | - | - | - | - | - | - | - | - | - |
| 1610-14M-115 | - | - | - | - | - | - | - | - | - |
| 14205M25 | - | - | 23.012 mm | - | - | - | - | - | - |
| 600-5M | - | - | - | - | 310 mm | - | - | 200 mm | - |
| 7405M09 | - | - | - | - | 3.6718 in | - | - | - | - |
| 7208M20 | - | 320.00 mm | - | 26 mm | - | 218 mm | - | - | 380.00 mm |
| 340020M170 | - | - | - | - | - | - | - | - | - |
| 8005M15 | - | - | - | - | - | - | - | - | - |
| 9293-2201 | - | - | - | - | - | - | - | - | - |
| 2100-14M-115 | - | - | - | - | - | - | 22 mm | - | 202.00 mm |
| 475-5M | - | - | 49.213 mm | - | 479.425 mm | - | - | - | - |
| 880-8M-50 | - | - | - | - | - | - | - | - | - |
| 565-5M-25 | - | - | - | - | - | - | - | - | - |
| 5205M15 | - | - | 13 mm | - | 130 mm | - | - | 105 mm | - |
| 1050-5M-25 | - | - | - | - | - | - | - | - | - |
| 5mm | - | - | - | - | - | - | - | - | - |
| 9505M15 | - | - | - | - | 170 mm | - | - | 95 mm | - |
| 560 | - | - | - | - | - | - | - | - | - |
Gates PowerGrip HTD Synchronous Timing Belt 9293-2201 102-3M-09 Video
PowerGrip® HTD® Timing Belts | Gates Corporation
PowerGrip® HTD® 8M, 14M and 20M belts are used in high performance drives in the machine tool, paper and textile industries where durability and low maintenance ...
Gates 776-8M-50 PowerGrip 8mm Pitch HTD Belt 9293- ...
PowerGrip HTD belts are suitable for many applications including data storage, hand power tools, postage handling, food processors, office machines, centrifuges ...
Gates PowerGrip HTD Belts 390-3M-15
Gates PowerGrip HTD Belts 390-3M-15: Amazon.com: Industrial & Scientific.
Industrial PowerGrip HTD Belt .591 in. GIB 6155M15
Buy Belt - Industrial PowerGrip HTD Belt .591 in. - GIB 6155M15 online from NAPA Auto Parts Stores. Get deals on automotive parts, truck parts and more.
PowerGrip® HTD® | Gates Unitta
PowerGrip® HTD® and Timing belts have historically been the most commonly used rubber synchronous belt profiles in the industry. Gates originated the HTD ...
GATES POWERGRIP® HTD® 3M & 5M - Industrial Belt Drives
The HTD® curvilinear tooth form ensures an optimised load distribution leading to high power transmission in low speed and high torque applications.
PowerGrip HTD Belts - Gates
PowerGrip® HTD® belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. ; Fiberglass tensile cord provides high ...