| Gates PowerGrip HTD Robotics Belts 850-5M-15 | Dimension W:2.0 in; Dimension T:24.3 in; Bearing UPC:013992033932; Dimension H:2.5 in; Dimension S:3.6 in; Series Type:Medium Series; Bearing - Housing - Seal:MSM155BRHRSS; Cr - Dynamic Load Rating:164111 lbf; Note:This product line wa; Maximum Speed:1320 rpm; Dimension N:20.8 in; Tensioning Unit Type:Tension Type; Bearing - Housing - Seal UPC:013992085412; Bearing Type:Split Cylindrical Re; Dimension R:2.2 in; |
| Gates PowerGrip HTD Synchronous Timing Belt 9293-2201 102-3M-09 | Shaft Size:105 mm; Dimension H:7.520 in; Housing Width:7.9 in; Dimension H2:15.9 in; Dimension J:17.2 in; Note:This product line wa; Dimension H1:1.5 in; Dimension K:3.2 in; Shipping Weight:431 lb; Cor - Static Load Rating:176025 lbf; Bolt Size:4 x M24; Seal Type:High Temperature Pac; Maximum Speed:1820 rpm; Dimension M:6.0 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Bearing Number:HSM105BX; |
| Gates PowerGrip HTD Belt 4755M15 USA Made | Shaft Tolerance:0.0030 in; Y2 - Geometry Factor:4.31; Shaft Size :85 mm; Full Timken Part Number:QAFL18A085SB; Dimension H:1.28 in; Eng Internal Radial Clearance - Min:0.0024; Dimension F:8.38 in; Oil Lubrication - B/C/O Seal:1000 rpm; Dimension RA:0.16 in; e - Geometry Factor:0.23; Dimension E:6.72 in; Float:0.083 in; Engineering Group:Mounted Bearing; Grease Lubrication - M/N Seal:1400 rpm; |
| Gates PowerGrip HTD Belt 9505M15 USA Made | Da - Outer Ring Backing Diameter:155.000 mm; UPC Code:087796208742; Superseded Part:22219CJW33; R - Inner Ring To Clear Radius1:2.0 mm; d:95 mm; r - Outer Ring To Clear Radius2:2.0 mm; Y0 - ISO Factor4:2.88; e - ISO Factor3:0.23; C0 - Static Radial Rating:441000 N; Reference Thermal Speed Rating (Grease):3200; Cg - Geometry Factor8:0.067; B - Inner Ring Width:43 mm; Cage Material:Steel; Cage Type:EJ; |
| Gates Unitta 459-3M-15 POWERGRIP HTD Timing Belt 459mm L* 15mm W | Snap Ring Width f max:3.500 mm; Grease Reference Speed:4200 rpm; Outside Ring Width B:49.000 mm; Weight:8.110 Kg; Bore Size d:105 mm; Clearance:C3; Snap Ring Diameter D2 max:237.000 mm; Cr - Dynamic Load Rating:183.7 kN; Oil Reference Speed:6000 rpm; Radius Rs min:3.000 mm; C0r - Static Load Rating:153.1 kN; Features:Snap Ring; Outside Diameter D:225.000 mm; |
| GATES POWERGRIP HTD TIMING BELT 6005M15 #05H68 | C - Cup Width:15.083 mm; R - Cone Backface To Clear Radius1:3.560 mm; da - Cone Frontface Backing Diameter:32 mm; e - ISO Factor8:0.35; Y - ISO Factor9:1.73; a - Effective Center Location3:-5.1 mm; G1 - Heat Generation Factor (Roller-Raceway):12.7; B - Cone Width:17.463 mm; Cg - Geometry Factor:0.0577; K - Factor7:1.69; Cup Part Number:15522A; Bearing Weight:0.20 Kg; B:19.449 mm; D:59.530 mm; Aa - Cage-Cone Backface Clearance:0 mm; |
| Gates PowerGrip HTD Timing Synchro Belt 14205M25 USA Made | Da - Cup Frontface Backing Diameter:71.10 mm; G2 - Heat Generation Factor (Rib-Roller End):13.3; B:23.012 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; C - Cup Width:18.186 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2980 lbf; B - Cone Width:19.812 mm; Y - ISO Factor9:1.5; R - Cone Backface To Clear Radius1:3.560 mm; C0 - Static Radial Rating:16700 lbf; r - Cup Backface To Clear Radius2:2.29 mm; |
| Gates PowerGrip HTD Belt 460020M170 4600-20M-170 Made in USA (NEW) | Dimension H1:1.5 in; Housing Width:7.9 in; Dimension H2:15.9 in; Dimension J:17.2 in; Shipping Weight:431 lb; Bearing - Housing - Seal:HSM100BRH; Bearing Number:HSM100BR; Seal Type:Felt Type; Bearing UPC:013992023551; Series Type:Heavy Series; Dimension M:6.0 in; Dimension H:7.520 in; Note:This product line wa; Pillow/Plummer Block Style:Split Cylindrical Ho; Support Type:Four-Bolt Plummer Bl; Dimension L:20.2 in; |
| Shop on eBay | C90 - Dynamic Radial Rating (90 million revolutions)4:3490 lbf; R - Cone Backface To Clear Radius1:0.760 mm; Db - Cup Backface Backing Diameter:55.12 mm; C0 - Static Radial Rating:12100 lbf; da - Cone Frontface Backing Diameter:34.04 mm; Bearing Weight:0.30 Kg; Aa - Cage-Cone Backface Clearance:0.8 mm; e - ISO Factor8:0.35; Series:15000; Y - ISO Factor9:1.71; C - Cup Width:15.875 mm; B:20.638 mm; Cg - Geometry Factor:0.0606; |
| GATES POWERGRIP HTD 8005M15 BELT..NOS | Radius Rs min:0.300 mm; Clearance:C3; Cr - Dynamic Load Rating:4.3 kN; Weight:0.02 Kg; Outside Ring Width B:7.000 mm; Oil Limiting Speed:21000 rpm; Bore Size d:25 mm; Features:Non-Contact Seals; Grease Limiting Speed:18000 rpm; C0r - Static Load Rating:2.9 kN; Outside Diameter D:37.000 mm; |
| Gates PowerGrip HTD Belt 5mm 645-5M-15 | Maximum Speed:2340 rpm; Dimension J1 :14-1/2 in; Bolt Size:4 x 3/4; Bearing Number:LSE315BX; Dimension K :2-3/4 in; Housing Width:5.2 in; Seal Type:Viton Single Lip; Shaft Size:3-15/16 in; Note:This product line wa; Bearing Type:Split Cylindrical Ex; Dimension J2 :12-19/32 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Series Type:Light Series; Dimension L :16-1/2 in; Bearing UPC:013992026552; |
| D&D Power Drive 4600-20M-290 PowerGrip HTD Belt, No Box* | Bearing Number:LSM280BR; Bolt Size:4 x M36; Note:This product line wa; Bearing Type:Split Cylindrical Re; Series Type:Light Series; Shaft Size:280 mm; Dimension H:300 mm; Support Type:Four-Bolt Plummer Bl; Dimension L:830 mm; Housing Width:8.0 in; Bearing UPC:013992029454; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension M:310 mm; Ca - Axial Load Rating:15017 lbf; Seal Type:High Temperature Pac; |
| No. | Brand | J | B | N | D | H | b | d | L |
| 7405M09 | - | - | - | - | 3.6718 in | - | - | - | - |
| 459-3M-15 | - | - | - | - | - | - | - | - | - |
| 2100-14M-115 | - | - | - | - | - | - | 22 mm | - | 202.00 mm |
| 600-5M-15 | - | - | - | - | 17.6250 in | - | - | 12.5000 in | - |
| 800-5M-25 | - | - | - | - | - | - | - | - | - |
| 6005M15 | - | - | 19.449 mm | - | 59.530 mm | - | - | - | - |
| 400mm | - | - | - | - | - | - | - | - | - |
| 7208M20 | - | 320.00 mm | - | 26 mm | - | 218 mm | - | - | 380.00 mm |
| 425-5M-25 | - | - | - | - | - | 108.00 mm | - | - | - |
| 880-8M-50 | - | - | - | - | - | - | - | - | - |
| 5205M15 | - | - | 13 mm | - | 130 mm | - | - | 105 mm | - |
| 800-5M-15 | - | - | - | - | 3.5433 in | - | - | - | - |
| 14205M25 | - | - | 23.012 mm | - | - | - | - | - | - |
| 8005M15 | - | - | - | - | - | - | - | - | - |
| 460020M170 | - | - | - | - | - | - | - | - | - |
| 475-5M | - | - | 49.213 mm | - | 479.425 mm | - | - | - | - |
| 1050-5M-25 | - | - | - | - | - | - | - | - | - |
| 1512 | - | - | - | - | - | - | - | - | - |
| 5mm | - | - | - | - | - | - | - | - | - |
| 4755M15 | - | - | 80 mm | - | 240 mm | - | - | 110 mm | - |
| 3* | - | - | - | - | - | - | - | - | - |
| 711-3M-15 | - | - | 19.000 mm | - | 63.000 mm | - | - | 38.000 mm | - |
| 565-5M-25 | - | - | - | - | - | - | - | - | - |
| 1778-14M | - | - | - | - | 4.8750 in | - | - | 1.8750 in | - |
| 4600-20M-290 | - | - | - | - | - | - | - | - | - |
| 3M | - | - | 23.8 mm | - | 62 mm | - | - | 30 mm | - |
| 1610-14M-115 | - | - | - | - | - | - | - | - | - |
Gates PowerGrip HTD 600-5M BELT Video
PowerGrip HTD Belts - Gates
PowerGrip® HTD® belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. ; Fiberglass tensile cord provides high ...
GATES POWERGRIP® HTD® 3M & 5M - Industrial Belt Drives
The HTD® curvilinear tooth form ensures an optimised load distribution leading to high power transmission in low speed and high torque applications.
Industrial PowerGrip HTD Belt .591 in. GIB 6155M15
Buy Belt - Industrial PowerGrip HTD Belt .591 in. - GIB 6155M15 online from NAPA Auto Parts Stores. Get deals on automotive parts, truck parts and more.
Gates PowerGrip HTD Belts 390-3M-15
Gates PowerGrip HTD Belts 390-3M-15: Amazon.com: Industrial & Scientific.
PowerGrip® HTD® Timing Belts | Gates Corporation
PowerGrip® HTD® 8M, 14M and 20M belts are used in high performance drives in the machine tool, paper and textile industries where durability and low maintenance ...
PowerGrip® HTD® | Gates Unitta
PowerGrip® HTD® and Timing belts have historically been the most commonly used rubber synchronous belt profiles in the industry. Gates originated the HTD ...
Gates 776-8M-50 PowerGrip 8mm Pitch HTD Belt 9293- ...
PowerGrip HTD belts are suitable for many applications including data storage, hand power tools, postage handling, food processors, office machines, centrifuges ...